LoRa模块传输距离远哇，这个项目就用这个做得。 代码在 Arduino IDE 1.8.x 或更高版本上编译，板子设置为 Arduino Uno。 发射器代码位于 mtx（主 mcu）和 stx（从 mcu）文件夹中。接收器 mcu 代码位于 rx 文件夹中。编译不需要外部库。 这里将 433MHz 频段与 SX1278 模块一起使用 ...

The field of radio control has benefited much from the onward march of technology. Where a basic 2-channel setup would once have cost hundreds of dollars, it’s now possible to get a high-end 2.4GHz ...

March 2, 2013 Add as a preferred source on Google Add as a preferred source on Google Tolik777's Instructables walkthrough provides the details, but basically you're strapping an Arduino controller ...

Of all the ways to catastrophically break a Sega Rally Championship Arcade cabinet, Artica's hack at Portuguese hackathon Codebits earlier this month must surely go down as the most creative. With the ...

To some of us, hacking an RC Car to simply follow a black line or avoid obstacles is too easy, and we’re sure [Shazin] would agree with that, since he created an RC Car that follows your face! The ...

Video games, move over. While speeding around a digital track can provide hours of fun, just how much fun could you have with an Arduino based RC car controlled with an iPad? Probably more than you ...

This is great -- developer Wannes Vermeulen has hacked a toy remote control car with an Arduino board and hooked it up to an iPad to drive it around. You can see video of the project in action over on ...

“I started using Bluetooth devices like the HC-05 modules, but I found that these sometimes randomly disconnected. Since then I’ve been using the NRF24L01 modules which is what’s in my openDog remotes ...

I made an Arduino RC car with a L298P driver PCB I designed myself Posted: March 12, 2026 | Last updated: March 12, 2026 Description: $2 for pcb Prototype, for more information visit: Download the ...